EMC E20-520 exam study materials

Are you IT person? Do you want to succeed? If you want to succeed, please do to buy ITCertKing's EMC E20-520 exam training materials. Our training materials have through the test of practice. it can help you to pass the IT exam. With the ITCertKing's EMC E20-520 exam training materials, you will have better development in the IT industry. You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation. Are you still worried about your exam? ITCertKing's EMC E20-520 exam training materials will satisfy your desire. We are through thick and thin with you and to accept this challenge together .

ITCertKing is a professional website. It focuses on the most advanced EMC E20-520 for the majority of candidates. With ITCertKing, you no longer need to worry about the EMC E20-520 exam. ITCertKing exam questions have good quality and good service. As long as you choose ITCertKing, ITCertKing will be able to help you pass the exam, and allow you to achieve a high level of efficiency in a short time.

Exam Code: E20-520
Exam Name: EMC (Calriion solutions specialist exam)
One year free update, No help, Full refund!
Total Q&A: 520 Questions and Answers
Last Update: 2013-12-25

Passing E20-520 exam is not very simple. E20-520 exam requires a high degree of professional knowledge of IT, and if you lack this knowledge, ITCertKing can provide you with a source of IT knowledge. ITCertKing's expert team will use their wealth of expertise and experience to help you increase your knowledge, and can provide you practice questions and answers E20-520 certification exam. ITCertKing will not only do our best to help you pass the E20-520 certification exam for only one time, but also help you consolidate your IT expertise. If you select ITCertKing, we can not only guarantee you 100% pass E20-520 certification exam, but also provide you with a free year of exam practice questions and answers update service. And if you fail to pass the examination carelessly, we can guarantee that we will immediately 100% refund your cost to you.

ITCertKing is a convenient website to provide training resources for IT professionals to participate in the certification exam. ITCertKing have different training methods and training courses for different candidates. With these ITCertKing's targeted training, the candidates can pass the exam much easier. A lot of people who participate in the IT professional certification exam was to use ITCertKing's practice questions and answers to pass the exam, so ITCertKing got a high reputation in the IT industry.

In recent years, fierce competition agitates the forwarding IT industry in the world. And IT certification has become a necessity. If you want to get a good improvement in your career, The method that using the ITCertKing’s EMC E20-520 exam training materials to obtain a certificate is very feasible. Our exam materials are including all the questions which the exam required. So the materials will be able to help you to pass the exam.

ITCertKing exam dumps are written by IT elite who have more than ten years experience, through research and practice. ITCertKing provides you with the latest and the most accurate questions and answers. ITCertKing exists for your success. To choose ITCertKing is to choose your success. If you want to pass EMC E20-520 certification exam, ITCertKing is your unique choice.

E20-520 Free Demo Download: http://www.itcertking.com/E20-520_exam.html

NO.1 Should a SnapView session stop automatically, what will happen to the running sessions?
A.All sessions pointing to the clone will fail over to SP B and continue to write.
B.All sessions running on the source LUN will be terminated.
C.Host buffers will be flushed and sessions restarted.
D.All memory mapping entries will be saved to the COFW log.
Answer:A

EMC original questions   E20-520 test questions   E20-520   E20-520 test questions

NO.2 What makes sizing of the reserved LUN pool a non-trivial task?
A.Reserved LUNs are assigned to specific source LUNs when the CLARiiON is laid out.
B.Source LUNs can be different sizes and only write to LUNs of the same size.
C.Reserved LUN pools may be different sizes and allocation to source LUNs is based on the next
available reserved LUN.
D.There are 512 reserved LUNs in all CLARiiON models while there may be many more source LUNs.
Answer:C

EMC   E20-520   E20-520   E20-520   E20-520

NO.3 If a customer wants to present a secondary image LUN of a MirrorView/S mirror set to a host, what
must they do first?
A.The primary image must be removed from the mirror set.
B.The secondary image must be placed in the host storage group.
C.The secondary image must be removed from the mirror set or the secondary image promoted to a
primary image.
D.The secondary image must be fractured from the mirror set or the secondary image promoted to a
primary image.
Answer:C

EMC   E20-520   E20-520

NO.4 Which statement describes the operation of the reserved LUN pool?
A.LUN IDs of reserved LUNs in the reserved LUN pool can only be between 2048 and 4096.
B.All reserved LUNs must be the same size, on FC disks, and have the same RAID type.
C.Separate reserved LUN pools are required for SnapView, Incremental SAN Copy, and MirrorView/A.
D.Reserved LUN pool is shared between SnapView, Incremental SAN Copy, and MirrorView/A.
Answer:D

EMC   E20-520 exam prep   E20-520

NO.5 Which statement applies when the Protected Restore option is enabled on a clone?
A.Once the reverse synchronization is complete, the clone is fractured.
B.All SnapView sessions on the source LUN must be stopped.
C.A clone cannot be marked "dirty" before starting a reverse synchronization.
D.When reverse synchronization is in process, no writes are allowed to the source LUN or clone.
Answer:A

EMC   E20-520   E20-520   E20-520 original questions   E20-520   E20-520 practice test

NO.6 A customer intends to use clones in their environment. They are concerned about the usability of clone
data.They ask about the result of removing a clone from a clone group.Which statement describes the
result of that operation?
A.Clone LUN may be used for reverse-synchronization operations.
B.Clone LUN may be used for synchronization operations.
C.Data on the clone LUN is flagged in the clone private LUN.
D.Data on the clone LUN is not affected and may be used by a host.
Answer:D

EMC exam prep   E20-520   E20-520 pdf   E20-520 answers real questions   E20-520

NO.7 Which device is enabled by default when creating a mirror set in a MirrorView/S environment on a
CX4-120 with FLARE 28?
A.Write intent log
B.Reserved LUN pool
C.Secondary Image
D.Clone private LUN
Answer:B

EMC exam prep   E20-520   E20-520   E20-520

NO.8 What CLARiiON is needed to meet a customer's requirement for their MirrorView/S environment that
will have 50 consistency groups?
A.CX4, FLARE 22
B.CX4, FLARE 28
C.CX3, FLARE 26
D.CX3, FLARE 28
Answer:B

EMC   E20-520 test questions   E20-520   E20-520 practice test   E20-520

NO.9 In a MirrorView/S environment, a primary image is owned by SPA on the primary array. Which SP must
own the secondary image on the secondary array within the same mirror set?
A.Either SP on the secondary array
B.SPB on the secondary array
C.SPA on the secondary array
D.It is marked as a private LUN on the secondary array
Answer:C

EMC braindump   E20-520 test   E20-520   E20-520 demo

NO.10 A customer starts four SnapView sessions on a source LUN. The sessions are scheduled to start at
8:00 A.M., 12:00 P.M., 4:00 P.M., and 8:00 P.M. At 5:15 P.M. the reserved LUN pool runs out of
space.What will happen next?
A.Most recently allocated reserved LUN will be released.
B.Reserved LUN allocated first will be released.
C.Space used by all sessions on the source LUN will be released.
D.Space used by the session that performed the most recent write will be released.
Answer:D

EMC   E20-520   E20-520   E20-520 exam prep   E20-520 test

NO.11 What happens when a snapshot is deactivated?
A.The snapshot becomes inaccessible to the primary host.
B.The SnapView session ends.
C.The snapshot becomes inaccessible to the secondary host.
D.All metadata is removed from the SP.
Answer:C

EMC certification   E20-520 test questions   E20-520 exam simulations   E20-520

NO.12 Which object would maintain the changes to a source LUN in the event a MirrorView/S configuration
suffered a link outage followed by an SP trespass?
A.Metavolume
B.Fracture log
C.Write intent log
D.Clone private LUN
Answer:C

EMC test answers   E20-520   E20-520   E20-520   E20-520

NO.13 During normal MirrorView/S operations, Navisphere Manager permits host access to how many
secondary images?
A.0
B.1
C.2
D.4
Answer:A

EMC   E20-520 test answers   E20-520 test answers   E20-520 study guide

NO.14 The number and size of SnapView pointers have reached memory allocation. What will take place to
adjust to this situation?
A.Pointers will be paged to the reserved LUN as required.
B.128 KB memory chunks will be added until the memory usage has been satisfied.
C.Pointers will be paged to and from the reserved LUN as required in 512 KB chunks.
D.An additional reserve LUN will be required.
Answer:C

EMC   E20-520   E20-520   E20-520 exam prep

NO.15 A storage administrator tries to create a clone group on a CLARiiON CX4 and receives an error
message that stops the clone group from being created.What could be a possible cause?
A.MirrorView has not been configured.
B.Population latency has not been configured.
C.No CPLs have been allocated.
D.No reserved LUNs have been allocated.
Answer:C

EMC dumps   E20-520 questions   E20-520 exam simulations   E20-520 dumps

NO.16 The primary image of a MirrorView/S mirror set has trespassed from SPA to SPB on the primary
array.Which SP now owns the secondary image?
A.ALUA determines ownership
B.SPA on the secondary array
C.Neither SPA or SPB
D.SPB on the secondary array
Answer:D

EMC original questions   E20-520   E20-520 test questions   E20-520 test answers

NO.17 What is the process for flagging source LUNs?
A.Snapshots are created, changing the LUN's state.
B.Via GUI interface or CLI the state change bit is switched.
C.The PSM LUN is set to "source."
D.Via Navisphere Analyzer the FLARE LUN is changed to a PSM LUN.
Answer:A

EMC   E20-520   E20-520

NO.18 What does the fracture log allow?
A.Incremental resynchronization of data
B.Creation of markers for each modified track
C.Capture of persistency errors from the source to target
D.Connectivity failures from both directions
Answer:A

EMC   E20-520   E20-520

NO.19 A storage administrator wants to use a point-in-time copy of a production LUN for testing and possibly
keep any changed data from that copy. The administrator's goal is to minimize the performance impact on
the production LUN as well as use the point-in-time copy for restoring their data.What is the extent size for
this LUN?
A.Use a clone and promote it as needed
B.Use a clone and reverse-synchronize as needed
C.Use a snapshot of a clone and roll back as needed
D.Use a snapshot and deactivate command to make changes permanent on the production LUN
Answer:B

EMC questions   E20-520 practice test   E20-520 exam dumps   E20-520   E20-520

NO.20 Which best describes the MirrorView/A replication process?
A.A write is received, tracked in the SAN Copy delta set mechanism, transmitted to the secondary array.
B.A write is received, tracked in the fracture log, transmitted to the secondary array.
C.A write is received, tracked in the SnapView private LUN, transmitted to the secondary array.
D.A write is received, tracked in the write intent log, transmitted to the secondary array.
Answer:A

EMC   E20-520 answers real questions   E20-520 questions

ITCertKing offer the latest 000-318 exam material and high-quality 1z0-822 pdf questions & answers. Our 600-199 VCE testing engine and E20-385 study guide can help you pass the real exam. High-quality 642-384 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/E20-520_exam.html